Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 562

www.dell.com | support.dell.com Related Commands show ip ssh rsa-authentication ip ssh rsa-authentication (Config) Displays RSA authorized keys. Enables RSA authentication. ip ssh server Configure an SSH server. Syntax ip ssh server {enable | port port-number} [version {1 | 2}] To disable SSH server functions, use the no ip ssh server enable command. Parameters enable port port-number [version {1 | 2}] Enter the key word enable to start the SSH server. (OPTIONAL) Enter the keyword port followed by the port number of the listening port of the SSH server. Range: 1 to 65535 Default: 22 (OPTIONAL) Enter the keyword version followed by the SSH version 1 or 2 to specify only SSHv1 or SSHv2. Defaults Default listening port is 22. Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command enables the SSH server and begins listening on a port. If a port is not specified, listening is on SSH default port 22. Example Figure 29-8. ip ssh server port Command Example FTOS# conf FTOS(conf)# ip ssh server port 45 FTOS(conf)# ip ssh server enable FTOS# Related Commands show ip ssh Displays the ssh information show crypto Display the public part of the SSH host-keys. Syntax show crypto key mypubkey {rsa | rsa1} Parameters Key mypubkey Enter the keyword key to display the host public key. Enter the keyword mypubkey to display the host public key. 562 | Security