Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 626

www.dell.com | support.dell.com show spanning-tree 0 Display the spanning tree group configuration and status of interfaces in the spanning tree group. Syntax show spanning-tree 0 [active | brief | guard | interface interface | root | summary] Parameters 0 active brief guard interface interface root summary Enter 0 (zero) to display information about that specific Spanning Tree group. (OPTIONAL) Enter the keyword active to display only active interfaces in Spanning Tree group 0. (OPTIONAL) Enter the keyword brief to display a synopsis of the Spanning Tree group configuration information. (OPTIONAL) Enter the keyword guard to display the type of guard enabled on an STP interface and the current port state. (OPTIONAL) Enter the keyword interface and the type slot/port of the interface you want displayed. Type slot/port options are the following: • For a Port Channel interface, enter the keyword port-channel followed by a number: • Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. (OPTIONAL) Enter the keyword root to display configuration information on the Spanning Tree group root. (OPTIONAL) Enter the keyword summary to only the number of ports in the Spanning Tree group and their state. Command Modes EXEC Privilege Usage You must enable spanning tree group 0 prior to using this command. Information Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 626 | Spanning Tree Protocol (STP)