Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 183

show qos dcb-output Displays the ETS configuration in a DCB output policy. Syntax show qos dcb-output [ets-profile] Parameters [ets-profile] Enter the ETS profile. Command Mode EXEC PRIVILEGE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 9-7. show qos dcb-output Command Example FTOS# show qos dcb-output dcb-output ets priority-group san qos-policy san priority-group ipc qos-policy ipc priority-group lan qos-policy lan show qos priority-groups Displays the ETS priority groups configured on the switch, including the 802.1p priority classes and ID of each group. Syntax show qos priority-groups Command Mode EXEC PRIVILEGE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 9-8. show qos priority-groups Command Example Force10#Force10#show qos priority-groups priority-group ipc priority-list 4 set-pgid 2 show stack-unit stack-ports ets detail Displays the ETS configuration applied to egress traffic on stacked ports, including ETS operational mode on each unit and the configurated priority groups with dot1p priorities, bandwidth allocation, and scheduler type. Syntax show stack-unit {all | stack-unit} stack-ports {all | port-number} ets detail Data Center Bridging | 183