Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 644
Command Example, Table 35-2., show ntp status Command Description, show ntp status
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 644 highlights
www.dell.com | support.dell.com Example Figure 35-7. show ntp status Command Example FTOS#show ntp status Clock is unsynchronized, stratum 16, no reference clock frequency is 0.000 ppm, stability is 0.000 ppm, precision is 4294967279 reference time is 00000000.00000000 (6:28:16.000 UTC Thu Feb 7 2036) clock offset is 0.000000 msec, root delay is 0.00000 sec root dispersion is 0.00000 sec, peer dispersion is 0.000 msec peer mode is unspec FTOS# Table 35-2. show ntp status Command Description Field "Clock is..." "frequency is..." "reference time is..." "clock offset is..." "root dispersion is..." "peer mode is..." Description States whether or not the switch clock is synchronized, which NTP stratum the system is assigned and the IP address of the NTP peer. Displays the frequency (in ppm), stability (in ppm) and precision (in Hertz) of the clock in this system. Displays the reference time stamp. Displays the system offset to the synchronized peer and the time delay on the path to the NTP root clock. Displays the root and path dispersion. State what NTP mode the switch is. This should be client mode. Related Commands show ntp associations Displays information on the NTP Master and Peer configurations. 644 | System Time and Date