Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 443

show interfaces private-vlan Display type and status of PVLAN interfaces. Syntax show interfaces private-vlan [interface interface] Parameters interface interface (OPTIONAL) Enter the keyword interface, followed by the ID of the specific interface for which to display PVLAN status. Defaults none Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage This command has two types of display - a list of all PVLAN interfaces or for a specific interface. Information Examples of both types of output are shown below. Examples Figure 23-1. show interfaces private-vlan Command Example FTOS# show interfaces private-vlan Interface Vlan PVLAN-Type Interface Type Status TenGig 2/1 10 Primary Promiscuous Up TenGig 2/2 100 Isolated Host Down TenGig 2/3 10 Primary Trunk Up TenGig 2/4 101 Community Host Up Figure 23-2. show interfaces private-vlan (Specific) Command Example FTOS# show interfaces private-vlan TenGig 2/2 Interface Vlan PVLAN-Type Interface Type Status TenGig 2/2 100 Isolated Host Up Table 23-1 defines the fields in the output, above. Table 23-1. show interfaces Command Description Field Interface Vlan PVLAN-Type Interface Type Status Description Displays type of interface and associated slot and port number Displays the VLAN ID of the designated interface Displays the type of VLAN in which the designated interface resides Displays the PVLAN port type of the designated interface. States whether the interface is operationally up or down. Related Commands private-vlan mode show vlan private-vlan Sets the mode of the selected VLAN to community, isolated, or primary. Displays the PVLANs and/or interfaces that are part of a PVLAN. Private VLAN (PVLAN) | 443