Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 561

ip ssh rsa-authentication (Config) Enable RSA authentication for the SSHv2 server. Syntax ip ssh rsa-authentication enable To disable RSA authentication, use the no ip ssh rsa-authentication enable command. Parameters enable Enter the keyword enable to enable RSA authentication for the SSHv2 server. Defaults RSA authentication is disabled by default. Command Modes Command History Usage Information Related Commands CONFIGURATION Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Enabling RSA authentication allows you to login without being prompted for a password. In addition, the OpenSSH compatible SSHv2 RSA public key must be added to the list of authorized keys (ip ssh rsa-authentication my-authorized-keys device://filename command). ip ssh rsa-authentication (EXEC) Adds keys for RSA authentication. ip ssh rsa-authentication (EXEC) Add keys for the RSA authentication. Syntax ip ssh rsa-authentication {my-authorized-keys WORD} Parameters To delete the authorized keys, use the no ip ssh rsa-authentication {my-authorized-keys} command. my-authorized-keys WORD Enter the keyword my-authorized-keys followed by the file name of the RSA authorized-keys. Defaults none Command Modes EXEC Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module If you want to log in without being prompted for a password, log in through RSA authentication. To do that, you must first add the SSHv2 RSA public keys to the list of authorized keys. This command adds the specified RSA keys to the following file: flash://ADMIN_DIR/ssh/authorized-keys-username (where username is the user associated with this terminal). Note: The no form of this command deletes the file flash://ADMIN_DIR/ssh/ authorized-keys-username Security | 561