Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 335
show lacp, show lacp port-channel-number Command Example
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
Related Commands show lacp show interfaces port-channel Displays the LACP information. Displays information on configured Port Channel groups. show lacp Display the LACP matrix. Syntax show lacp port-channel-number [sys-id | counters] Parameters port-channel-number sys-id counters Enter a port-channel number: Range: 1 to 128 (OPTIONAL) Enter the keyword sys-id and the value that identifies a system. (OPTIONAL) Enter the keyword counters to display the LACP counters. Command Modes EXEC EXEC Privilege Command History Example 1 Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 17-2. show lacp port-channel-number Command Example FTOS#show lacp 1 Port-channel 1 admin up, oper up, mode lacp Actor System ID: Priority 32768, Address 0001.e800.a12b Partner System ID: Priority 32768, Address 0001.e801.45a5 Actor Admin Key 1, Oper Key 1, Partner Oper Key 1 LACP LAG 1 is an aggregatable link A - Active LACP, B - Passive LACP, C - Short Timeout, D - Long Timeout E - Aggregatable Link, F - Individual Link, G - IN_SYNC, H - OUT_OF_SYNC I - Collection enabled, J - Collection disabled, K - Distribution enabled L - Distribution disabled, M - Partner Defaulted, N - Partner Non-defaulted, O - Receiver is in expired state, P - Receiver is not in expired state Port Te 10/6 is enabled, LACP is enabled and mode is lacp Actor Admin: State ACEHJLMP Key 1 Priority 128 Oper: State ACEGIKNP Key 1 Priority 128 Partner Admin: State BDFHJLMP Key 0 Priority 0 Oper: State BCEGIKNP Key 1 Priority 128 FTOS# Example 2 Figure 17-3. show lacp sys-id Command Example FTOS#show lacp 1 sys-id Actor System ID: Priority 32768, Address 0001.e800.a12b Partner System ID: Priority 32768, Address 0001.e801.45a5 FTOS# Link Aggregation Control Protocol (LACP) | 335