Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 523
edge-port bpdufilter default, protocol spanning-tree rstp
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 523 highlights
Command Modes CONFIGURATION RSTP (conf-rstp) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands max-age hello-time Changes the wait time before RSTP transitions to the Forwarding state. Changes the time interval between BPDUs. edge-port bpdufilter default Enable BPDU Filter globally to filter transmission of BPDU on port fast enabled interfaces. Syntax edge-port bpdufilter default To disable global bpdu filter default, use the no edge-port bpdufilter default command. Defaults Disabled Command Modes Command History CONFIGURATION (conf-rstp) Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module protocol spanning-tree rstp Enter the RSTP mode to configure RSTP. Syntax protocol spanning-tree rstp To exit the RSTP mode, use the exit command. Defaults Not configured Command Modes CONFIGURATION RSTP (conf-rstp) Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 28-2. protocol spanning-tree rstp Command Example FTOS(conf)#protocol spanning-tree rstp FTOS(conf-rstp)##no disable Usage RSTP is not enabled when you enter RSTP mode. To enable RSTP globally on the system, use the no Information description command from RSTP mode. Related Commands description Disable RSTP globally on the system. Rapid Spanning Tree Protocol (RSTP) | 523