Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 309

Table 15-4. show hosts Command Example Fields (continued) Field Flags TTL Type Address Description Classifies the entry as one of the following: • perm - the entry was manually configured and will not time out • temp - the entry was learned and will time out after 72 hours of inactivity. Also included in the flag is an indication of the validity of the route: • ok - the entry is valid. • ex - the entry expired. • ?? - the entry is suspect. Displays the amount of time until the entry ages out of the cache. For dynamically learnt entries only. Displays IP as the type of entry. Displays the IP address(es) assigned to the host. Related Commands traceroute ip host Views the DNS resolution Configures a host. show ip cam stack-unit Display content-addressable memory (CAM) entries. Syntax show ip cam stack-unit 0-5 port-set pipe-number [ip-address mask [longer-prefixes] | detail | member-info | summary] Parameters 0-5 pipe-number ip-address mask [longer-prefix] detail member-info summary Enter the stack-unit ID, from 0 to 5. Enter the number of the Port-Pipe number. Range: 0 to 0 (OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. Enter the keyword longer-prefixes to view routes with a common prefix. Enter the keyword detail to display the group index ID used by the ecmp routes in the CAM. Enter the keyword member-info to display the group index used by the ecmp, the number of egress ports (members) for the ecmp, and the port details of each member. The detail information under member-info will give the MAC address, VLAN ID and gateway of every member port of the ecmp. (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the total number routes which can be entered in to CAM. Command Modes Command History EXEC EXEC Privilege Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module IPv4 Routing | 309