Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 75
telnet
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Related Commands This display output is an accumulation of the same information that is displayed when you execute one of the following show commands: • show cam • show clock • show environment • show file • show interfaces • show inventory • show ip protocols • show ip route summary • show processes cpu • show processes memory • show redundancy • show running-conf • show version show version show system show environment show processes memory Displays the FTOS version. Displays the current switch status. Displays system component status. Displays memory usage based on the running processes. telnet Connect through Telnet to a server. The Telnet client and server in FTOS supports IPv4 connections. You can establish a Telnet session directly to the router, or a connection can be initiated from the router. Syntax telnet {host | ip-address} [/source-interface] Parameters host ip-address source-interface Enter the name of a server. Enter the IPv4 address in dotted decimal format of the server. (OPTIONAL) Enter the keywords /source-interface followed by the interface information to include the interface's IP address. Enter the following keywords and slot/port or number information: • For a Loopback interface, enter the keyword loopback followed by a number from zero (0) to 16383. • For the Null interface, enter the keyword null followed by 0. • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For a VLAN interface, enter the keyword vlan followed by a number from 1 to 4094. Control and Monitoring | 75