Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 501
passive-interface, redistribute
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 501 highlights
passive-interface Suppress routing updates on a specified interface. Syntax passive-interface interface To delete a passive interface, use the no passive-interface interface command. Parameters interface Enter the following information: • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. Defaults Not configured. Command Modes ROUTER RIP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information Although the passive interface neither sends nor receives routing updates, the network on that interface is still included in RIP updates sent via other interfaces. Related Commands neighbor network Enables RIP for a specified network. Defines a neighbor. redistribute Redistribute information from other routing instances. Syntax redistribute {connected | static} To disable redistribution, use the no redistribute {connected | static} command. Parameters connected static Enter the keyword connected to specify that information from active routes on interfaces is redistributed. Enter the keyword static to specify that information from static routes is redistributed. Defaults Not configured. Command Modes ROUTER RIP Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module To redistribute the default route (0.0.0.0/0), configure the default-information originate command. Routing Information Protocol (RIP) | 501