Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 668
show config, show vrrp, Active VRRP group
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 668 highlights
www.dell.com | support.dell.com show config View the non-default VRRP configuration. Syntax show config [verbose] Parameters verbose (OPTIONAL) Enter the keyword verbose to view all VRRP group configuration information, including defaults. Command Modes VRRP Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 38-1. show config Command Example FTOS(conf-if-vrid-4)#show con vrrp-group 4 virtual-address 119.192.182.124 ! show vrrp View the VRRP groups that are active. If no VRRP groups are active, the FTOS returns "No Active VRRP group." Syntax show vrrp [vrrp-id] [interface] [brief] Parameters vrrp-id interface brief (OPTIONAL) Enter the Virtual Router Identifier for the VRRP group to view only that group. Range: 1 to 255. (OPTIONAL) Enter the following keywords and slot/port or number information: • For Port Channel interface types, enter the keyword port-channel followed by the number: Range: 1 to 128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN interface, enter the keyword vlan followed by the VLAN ID. The VLAN ID range is from 1 to 4094. (OPTIONAL) Enter the keyword brief to view a table of information on the VRRP groups. Command Modes EXEC EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 668 | Virtual Router Redundancy Protocol (VRRP)