Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 659
vlan-stack access, vlan-stack compatible
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 659 highlights
Related Commands dei mark Sets the DEI value on egress. vlan-stack access Specify a Layer 2 port or port channel as an access port to the Stackable VLAN network. Syntax vlan-stack access To remove access port designation, use the no vlan-stack access command. Defaults Not configured. Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Prior to enabling this command, to place the interface in Layer 2 mode, you must enter the switchport Information command. To remove the access port designation, the port must be removed (use the no member interface command) from all stackable VLAN-enabled VLANs. vlan-stack compatible Enable the Stackable VLAN feature on a VLAN. Syntax vlan-stack compatible To disable the stackable VLAN feature on a VLAN, use the no vlan-stack compatible command. Defaults Not configured. Command Modes CONF-IF-VLAN Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module You must remove the members prior to disabling the stackable VLAN feature. To view the stackable VLANs, use the show vlan command in EXEC Privilege mode. Stackable VLANs contain members, designated by the M in the Q column of the command output. VLAN Stacking | 659