Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 389

Related Commands router ospf Enters the ROUTER OSPF mode to configure an OSPF instance. auto-cost Specify how the OSPF interface cost is calculated based on the reference bandwidth method. Syntax auto-cost [reference-bandwidth ref-bw] To return to the default bandwidth or to assign cost based on the interface type, use the no auto-cost [reference-bandwidth] command. Parameters ref-bw (OPTIONAL) Specify a reference bandwidth in megabits per second. Range: 1 to 4294967 Default: 100 megabits per second. Defaults 100 megabits per second. Command Modes ROUTER OSPF Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module clear ip ospf Clear all OSPF routing tables. Syntax clear ip ospf process-id [process] Parameters process-id process Enter the OSPF Process ID to clear a specific process. If no Process ID is entered, all OSPF processes are cleared. (OPTIONAL) Enter the keyword process to reset the OSPF process. Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Open Shortest Path First (OSPFv2) | 389