Netgear XSM4324FS User Manual - Page 105

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. To display DHCP conflicts information, select one of the following radio buttons: • All Address Conflicts. Specify all address conflicts to be deleted. • Specific Address Conflict. Specify a specific dynamic binding to be deleted. The following table describes the DHCP Conflicts Information fields. Table 38. DHCP Conflicts Information Field IP Address Hardware Address Detection Method Detection Time Description The IP address of the host as recorded on the DHCP server. The client's hardware address. The manner in which the IP address of the hosts were found on the DHCP server. The time when the conflict was detected in N days NNh:NNm:NNs format with respect to the system up time. Configure the DHCP Relay To configure DHCP relay: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Services > DHCP Relay. Configure System Information 105 User Manual