Netgear XSM4324FS User Manual - Page 705

M4300 Intelligent Edge Series Fully Managed Stackable Switches • Destination Mask: 255.255.255.0 • Destination L4 Port: Other, and enter 4568 as the destination port value For more information about this page, see Configure a DiffServ Class on page 485. 4. Click the Apply button. 5. From the Policy Configuration page, create a new policy with the following settings: • Policy Selector: Policy1 • Member Class: Class1 For more information about this page, see Configure DiffServ Policy on page 493. 6. Click the Add button. The policy is added. 7. Click the Policy1 hyperlink to view the Policy Class Configuration page for this policy. 8. Configure the Policy attributes as follows: • Assign Queue: 3 • Policy Attribute: Simple Policy • Color Mode: Color Blind • Committed Rate: 1000000 Kbps • Committed Burst Size: 128 KB • Confirm Action: Send • Violate Action: Drop For more information about this page, see Configure DiffServ Policy on page 493. 9. From the Service Configuration page, select the check box next to interfaces g7 and g8 to attach the policy to these interfaces, and then click the Apply button. (See Configure the DiffServ Service Interface on page 496.) All UDP packet flows destined to the 192.12.2.0 network with an IP source address from the 192.12.1.0 network that include a Layer 4 Source port of 4567 and Destination port of 4568 from this switch on ports 7 and 8 are assigned to hardware queue 3. On this network, traffic from streaming applications uses UDP port 4567 as the source and 4568 as the destination. This real-time traffic is time sensitive, so it is assigned to a high-priority hardware queue. By default, data traffic uses hardware queue 0, which is designated as a best-effort queue. Also the confirmed action on this flow is to send the packets with a committed rate of 1000000 Kbps and burst size of 128 KB. Packets that violate the committed rate and burst size are dropped. Configuration Examples 705 User Manual