Netgear XSM4324FS User Manual - Page 400

M4300 Intelligent Edge Series Fully Managed Stackable Switches 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing > OSPFv3 > Advanced > Area Range Configuration. 5. Enter the OSPFv3 Area ID. An area ID is a 32-bit integer in dotted-decimal format that uniquely identifies the area to which a router interface connects. 6. Enter the IPv6 Prefix for the address range for the selected area. 7. From the list in the LSDB Type field, select the type of link advertisement associated with the specified area and address range. Options are: Network Summary or NSSA External. The default type is Network Summary. 8. In the Advertise field, select the Enable or Disable option. If you select Enable, the address range is advertised outside the area through a network summary LSA. The default is Enable. 9. Click the Add button. The new address range is added to the switch. Configure the OSPFv3 Interface To configure the OSPFv3 interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. Configure OSPF and OSPFv3 400 User Manual