Netgear XSM4324FS User Manual - Page 251

M4300 Intelligent Edge Series Fully Managed Stackable Switches If disabled, these MLD snooping modes are automatically disabled. Note: For information about other settings on the page, see Configure MLD Snooping Manually on page 251. 6. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable MLD Snooping Configuration fields. Table 90. MLD Snooping Configuration Field Multicast Control Frame Count Interfaces Enabled for MLD Snooping VLAN IDs Enabled For MLD Snooping Definition The number of multicast control frames that have been processed by the CPU. One or more interfaces on which MLD snooping is administratively enabled. MLD snooping must be enabled globally and on an interface for the interface to be able to snoop MLD packets to determine which segments should receive multicast packets directed to the group address. Displays one or more VLANs on which MLD snooping is administratively enabled. Configure MLD Snooping Manually You can manually configure the settings for MLD snooping, which is used to build forwarding lists for multicast traffic. You can also configure MLD snooping automatically (see Configure MLD Snooping Automatically with MLD Plus Mode on page 250). To configure the settings for MLD snooping manually: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching> Multicast > MLD Snooping > Configuration. Configure Switching Information 251 User Manual