Netgear XSM4324FS User Manual - Page 673

M4300 Intelligent Edge Series Fully Managed Stackable Switches 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Maintenance > Reset > Factory Default. 5. Select the check box. 6. Click the Apply button. A confirmation pop-up window opens. 7. Click Yes to confirm. All configuration parameters are reset to their factory default values. All changes you made are, even if you issued a save. Reset All User Passwords to Their Default Settings To reset all user passwords to their default settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Maintenance > Reset > Password Reset. 5. Select the check box. Maintenance and Troubleshooting 673 User Manual