Netgear XSM4324FS User Manual - Page 512

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure Global TACACS Settings You can configure the TACACS settings for communication between the switch and the TACACS server you configure through the inband management port. To configure global TACACS settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Management Security > TACACS > TACACS Configuration. 5. In the Key String field, specify the authentication and encryption key for TACACS communications between the switch and the TACACS server. The valid range is 0-128. The key must match the key configured on the TACACS server. 6. In the Connection Timeout field, specify the maximum number of seconds allowed to establish a TCP connection between the switch and the TACACS server. 7. In the Source Interface list, select the source interface which will be used for TACACS. Possible values are as follows: • None. The primary IP address of the originating (outbound) interface is used as the source address. • Routing interface. The primary IP address of a physical port is used as the source address. Manage Switch Security 512 User Manual