Netgear XSM4324FS User Manual - Page 50

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure a Loopback Interface You can create, configure, and remove loopback interfaces. To configure a loopback interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Management > Loopback Interface. 5. Use the Loopback Interface Type list to select IPv4 or IPv6 loopback interface. 6. In the Loopback ID list, select a list of currently configured loopback interfaces. 7. In the Primary IP Address field, enter the primary address for this interface in dotted-decimal notation. This option is visible when IPv4 loopback is selected. 8. In the Primary IP Subnet Mask field, enter the primary IPv4 subnet mask in dotted-decimal notation. This option is visible when IPv4 loopback is selected. 9. In the Secondary IP Address field, enter the secondary IP address in dotted-decimal notation. This input field is visible only when Add Secondary is selected. This option is visible when IPv4 loopback is selected. Configure System Information 50 User Manual