Netgear XSM4324FS User Manual - Page 465

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 179. IPv6 Multicast MLD Traffic (continued) Field Leaves Received Leaves Sent Description The number of valid MLD leaves received by the router. The number of valid MLD leaves sent by the router. Configure the IPv6 MLD Proxy Interface To configure the IPv6 multicast MLD proxy interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> IPv6 Multicast > MLD > Proxy Interface Configuration. 5. In the Interface list, select the interface. 6. In the Admin Mode list, select Enable or Disable. This sets the administrative status of MLD proxy on the selected interface. The default is Disable. Routing, MLD, and Multicast global admin modes must be enabled to enable MLD proxy interface mode. 7. In the Unsolicited Report Interval field, enter the unsolicited time interval value in seconds. Configure Multicast Routing 465 User Manual