Netgear XSM4324FS User Manual - Page 123

M4300 Intelligent Edge Series Fully Managed Stackable Switches The Unit field displays the current PoE switch unit number. The Slot field displays the current PoE slot number for model M4300-96X. 5. To configure the settings for a PoE switch unit, select the check box for the switch unit number. 6. From the Power Management mode menu, select the power management algorithm that the switch uses to deliver power to the requesting PDs: • Static. Select Static to specify that the power allocated for each port depends on the type of power threshold that is configured on the port. • Dynamic. Select Dynamic to specify that the power consumption on each port is measured and calculated in real time. 7. To set the traps, from the PoE Trap Configuration menu, select Enable to activate the PoE traps or Disable to deactivate the PoE traps. The default setting is enabled. 8. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable fields on the page. Table 43. Nonconfigurable fields on the basic PoE Configuration page Field Model Host Status Firmware Version Power Status Total Power (Main AC) Description The model of the PoE port card. The switch in which the PoE port card is installed. The status of the PoE port card. The firmware version of the PoE software. Indicates the power status. The maximum power in watts the switch can deliver to all ports. If N/A is displayed, the power supply is not present. Configure System Information 123 User Manual