Netgear XSM4324FS User Manual - Page 428

M4300 Intelligent Edge Series Fully Managed Stackable Switches The following table describes the nonconfigurable information that is displayed. Table 158. DVMRP Next Hop Field Source IP Source Mask Next Hop Interface Type Description The IP address used with the source mask to identify the source network for this table entry. The network mask used with the source IP address. The outgoing interface for this next hop. The next hop type. Leaf means that no downstream dependent neighbors exist on the outgoing interface. Otherwise, the type is branch. View the Multicast DVMRP Prune To view the multicast DVMRP prune: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Multicast > DVMRP > DVMRP Prune. 5. To refresh the page with the latest information on the switch, click the Refresh button. The following table describes the nonconfigurable information that is displayed. Table 159. DVMRP Prune Field Group IP Source IP Description The group address that was pruned. The IP address used with the source mask to identify the source network for this table entry. Configure Multicast Routing 428 User Manual