Netgear XSM4324FS User Manual - Page 450

M4300 Intelligent Edge Series Fully Managed Stackable Switches 9. Click the Add button. The static route is added to the switch. 10. Click the Apply button. Your settings are saved. Configure the Multicast Admin Boundary The definition of an administratively scoped boundary is a mechanism to stop the ingress and egress of multicast traffic for a given range of multicast addresses on a given routing interface. To configure the multicast admin boundary: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Multicast > Admin Boundary Configuration. 5. In the Interface list, select the router interface for which the administratively-scoped boundary is to be configured. 6. In the Group IP field, enter the multicast group address for the start of the range of addresses to be excluded. The address must be in the range of 239.0.0.0 through 239.255.255.255. 7. In the Group Mask field, enter the mask to be applied to the multicast group address. The combination of the mask and the group IP gives the range of administratively scoped addresses for the selected interface. 8. Click the Add button. The administratively scoped boundary is added. Configure Multicast Routing 450 User Manual