Netgear XSM4324FS User Manual - Page 252

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Select the MLD Snooping Admin Mode Enable or Disable radio button to specify the administrative mode for MLD snooping for the switch. The default is Disable. 6. Select the Proxy Querier Mode Enable or Disable radio button. This enables or disables an MLD proxy querier on the system. If it is disabled, then an MLD proxy query with source IP 0::0 is not sent in response to an MLD leave packet. If it is enabled, then MLD proxy queries are sent. The default value is Enable. 7. Select the Exclude Mrouter Interface Mode Enable or Disable radio button. This selection specifies the type of information that is forwarded to the upstream multicast router interface. If enabled, the switch blocks all unknown multicast data through the mrouter port, whether the port is configured dynamically or statically. Only MLD PDUs are allowed to pass through the mrouter port to the upstream router interface. The default is Enable. If disabled, the switch forwards both unknown multicast data and MLD PDUs to the upstream multicast router interface. Note: For information about MLD Plus mode, see Configure MLD Snooping Automatically with MLD Plus Mode on page 250. 8. Click the Apply button. Your settings are saved. Configure Switching Information 252 User Manual