Netgear XSM4324FS User Manual - Page 474

M4300 Intelligent Edge Series Fully Managed Stackable Switches 7. Click the Apply button. Your settings are saved. Map DSCP Values to Queues You can specify which internal traffic class to map the corresponding DSCP value. To map DSCP values to queues: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select QoS > CoS > Advanced > IP DSCP to Queue Mapping. The IP DSCP field displays an IP DSCP value from 0 to 63. 5. For each DSCP value, specify which internal traffic class to map the corresponding IP DSCP value. The queue number depends on specific hardware. 6. Click the Apply button. Your settings are saved. Configure Quality of Service 474 User Manual