Netgear XSM4324FS User Manual - Page 321

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure the IPv6 Prefix Settings Configure the IPv6 prefix settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> IPv6 > Advanced > Prefix Configuration. 5. From the Interface list, select the interface. When the selection is changed, a page update occurs, causing all fields to be updated for the newly selected port. All physical interfaces are valid. 6. In the IPv6 Prefix field, specify the IPv6 prefix for an interface. 7. In the Prefix Length field, specify the IPv6 prefix length for an interface. 8. In the EUI64 list, select to Enable or Disable the specified 64-bit unicast prefix. 9. In the Valid Life Time field, specify the router advertisement per prefix time. This is the amount of time allowed to consider the prefix valid for the purpose of on-link determination. The valid life time is 0 to 4294967295. 10. In the Preferred Life Time field, specify the router advertisement per prefix time. An autoconfigured address generated from this prefix is preferred. The preferred life time must be in the range 0 to 4294967295. 11. From the Onlink Flag list, select Enable or Disable. This specifies whether the selected prefix can be used for on-link determination. The default is Enable. Manage Routing 321 User Manual