Netgear XSM4324FS User Manual - Page 421

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. In the Group IP field, enter multicast group IP address. 6. In the Egress VLAN List field, enter the VLAN or VLANs to which the multicast group IP address belongs. 7. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information that is displayed. Table 153. Mroute Static-Multicast Configuration Field Description Maximum Multicast Static Address The maximum number of static multicast addresses that the Mroute table Count can contain. Current Multicast Static Address Count The number of static multicast addresses that were added to the Mroute table. Configure Global Multicast Settings To configure global multicast settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. Configure Multicast Routing 421 User Manual