Netgear XSM4324FS User Manual - Page 469

M4300 Intelligent Edge Series Fully Managed Stackable Switches 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> IPv6 Multicast > Static Routes Configuration. 5. In the Source IP field, enter the IP address that identifies the multicast packet source for the entry you are creating. 6. In the Prefix Length field, enter the prefix length to be applied to the Source IPv6 address. 7. In the RPF Neighbor field, enter the IP address of the neighbor router on the path to the source. 8. In the Metric field, enter the link state cost of the path to the multicast source. The range is 0 to 255; the default is 1. You can change the metric for a configured route by selecting the static route and editing this field. 9. Select the interface number from the RPF Interface list. This is the interface that connects to the neighbor router for the given source IP address. 10. Click the Add button. The static route is added to the switch. 11. Click the Apply button. Your settings are saved. Configure Multicast Routing 469 User Manual