Netgear XSM4324FS User Manual - Page 451

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure IPv6 Multicast Settings View the IPv6 Multicast Mroute Table You can view the contents of the Mroute Table in tabular format. To view the Mroute Table: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing > IPv6 Multicast > Mroute Table. 5. To refresh the page with the latest information on the switch, click the Refresh button. The following table describes the nonconfigurable information that is displayed. Table 172. Multicast Mroute Table Field Group IP Source IP Incoming Interface Outgoing Interfaces Up Time (hh:mm:ss) Expiry Time (hh:mm:ss) RPF Neighbor Description The destination group IP address. The IP address of the multicast packet source to be combined with the group IP to fully identify a single route whose Mroute table entry. The incoming interface on which multicast packets for this source/group arrive. The list of outgoing interfaces on which multicast packets for this source/group are forwarded. The time in seconds since the entry was created. The time in seconds before this entry ages out and is removed from the table. The IP address of the reverse path forwarding (RPF) neighbor. Configure Multicast Routing 451 User Manual