Netgear XSM4324FS User Manual - Page 513

M4300 Intelligent Edge Series Fully Managed Stackable Switches • Routing VLAN. The primary IP address of a VLAN routing interface is used as the source address. • Routing loopback interface. The primary IP address of a routing loopback interface is used as the source address. • Service port. The management port source IP is used as the source address. By default VLAN 1 is used as source interface. When the None value is displayed, it means that the configured routing interface has become nonrouting. 8. Click the Apply button. Your settings are saved. Configure TACACS Server Settings You can configure up to five TACACS servers with which the switch can communicate. To configure TACACS server settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Management Security> TACACS > TACACS Server Configuration. 5. Use TACACS Server to configure the TACACS server IP address. 6. Use Priority to specify the order in which the TACACS servers are used. The valid range is 0-65535. 7. Use Port to specify the authentication port. It must be within the range 0-65535. 8. Use Key String to specify the authentication and encryption key for TACACS communications between the device and the TACACS server. The valid range is 0-128. The key must match the key used on the TACACS server. 9. Use Connection Timeout to specify the amount of time that passes before the connection between the device and the TACACS server time-out. Manage Switch Security 513 User Manual