Netgear XSM4324FS User Manual - Page 436

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Use the Search menu to search for multicast entries by interface or group IP address. • Select Interface from the menu, enter the interface in unit/slot/port format (for example, 1/0/13), and click the Go button. If the entry exists, the entry is displayed as the first entry, followed by the remaining entries. • Select Group IP from the menu, enter the multicast group IP, and click the Go button. If the entry exists, that entry with the matching group IP address is displayed as the first entry, followed by the remaining entries. An exact match is required. 6. To refresh the page with the latest information on the switch, click the Refresh button. The following table describes the nonconfigurable information that is displayed. Table 163. Multicast IGMP Membership Field Interface Group IP Compatibility Mode Source Filter Mode Source Hosts Expiry Time Description The interface on which multicast packets are forwarded. The IP multicast group address for which data is to be displayed. This parameter shows group compatibility mode (v1, v2, and v3) for this group on the specified interface. The source filter mode (Include, Exclude, or NA) for the specified group on this interface. When NA mode is active, the field is blank. This parameter shows source addresses that are members of this multicast address. This parameter shows expiry time interval against each source address that are members of this multicast group. This is the amount of time after which the specified source entry is aged out. Configure the IGMP Proxy Interface To configure the IGMP proxy interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. Configure Multicast Routing 436 User Manual