Netgear XSM4324FS User Manual - Page 378

M4300 Intelligent Edge Series Fully Managed Stackable Switches 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing > OSPF > Advanced > Neighbor Table. 5. To refresh the page with the latest information on the switch, click the Refresh button. 6. To clear all the neighbors in the table, click the Clear button. The following table describes the nonconfigurable information that is displayed. Table 135. OSPF Neighbor Table Field Interface Neighbor IP Address Neighbor Interface Index Router ID Area ID Options Router Priority Description The interface for which data is to be displayed or configured. Slot 0 is the base unit. The IP address of the neighboring router's interface to the attached network. It is used as the destination IP address when protocol packets are sent as unicasts along this adjacency. Also used in router LSAs as the lik ID for the attached network if the neighboring router is selected to be designated router. The neighbor IP address is learned when hello packets are received from the neighbor. For virtual links, the neighbor IP address is learned during the routing table build process. A unit/slot/port identifying the neighbor interface index. A 32-bit integer in dotted-decimal format representing the neighbor interface. The area ID of the OSPF area associated with the interface. An integer value that indicates the optional OSPF capabilities supported by the neighbor. The neighbor's optional OSPF capabilities are also listed in its hello packets. This enables received hello packets to be rejected (for example, neighbor relationships do not even start to form) if there is a mismatch in certain crucial OSPF capabilities. The OSPF priority for the specified interface. The priority of an interface is a priority integer from 0 to 255. A value of 0 indicates that the router is not eligible to become the designated router on this network. Configure OSPF and OSPFv3 378 User Manual