Netgear XSM4324FS User Manual - Page 96

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure DHCP Server Settings You can configure settings for DHCP server, DHCP pools, DHCP bindings, and DHCP relay. You can also view DHCP statistics and conflicts. Configure DHCP Server To configure a DHCP server: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Services > DHCP Server > DHCP Server Configuration. 5. Select the Admin Mode Disable or Enable radio button. This specifies whether the DHCP service is enabled or disabled. The default value is Disable. 6. Use Ping Packet Count to specify the number of packets a server sends to a pool address to check for duplication as part of a ping operation. The default value is 2. Valid range is 0, 2 to 10. Setting the value to 0 disables the function. Configure System Information 96 User Manual