Netgear XSM4324FS User Manual - Page 660

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Select the Session ID number from the list. 6. Select the Admin Mode True (enabled) or False (disabled) radio button for the selected session. When a particular session is enabled, any traffic entering or leaving the source ports of the session is copied (mirrored) onto the corresponding destination port or a remote switched port analyzer (RSPAN) VLAN. By default, Admin mode is False (disabled). 7. Select the RSPAN Destination VLAN from the list of available VLAN IDs. 8. Select the RSPAN Reflector Port from the list of reflector port interfaces. 9. Select from the Filter Type list to configure IP or MAC ACLs that can mirror traffic that matches a permit rule. Possible values are as follows: • None. • IP ACL. Configure IP ACL. • MAC ACL. Configure MAC ACL. 10. Enter the Filter Name, if a filter is configured for the session. 11. Click the Apply button. Your settings are saved. Configure an RSPAN Source Interface To configure an RSPAN source interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. Monitor the Switch and Network 660 User Manual