Netgear XSM4324FS User Manual - Page 545

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure 802.1X Settings You can enable or disable 802.1X access control on the system. To configure 802.1X settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Port Authentication > Advanced > 802.1X Configuration. 5. Select the Administrative Mode Disable or Enable radio button. The default value is Disable. 6. Select the VLAN Assignment Mode Disable or Enable radio button. The default value is Disable. 7. Select the EAPOL Flood Mode Disable or Enable radio button. The default value is Disable. 8. Use Dynamic VLAN Creation Mode to select Disable or Enable. The default value is Disable. 9. Use Monitor Mode to select Disable or Enable. The default value is Disable. The feature monitors the dot1x authentication process and helps in diagnosis of the authentication failure cases. Manage Switch Security 545 User Manual