Netgear XSM4324FS User Manual - Page 516

M4300 Intelligent Edge Series Fully Managed Stackable Switches 6. In the columns in table header (1, 2, 3, 4, 5, 6), select the method to appear first in the selected authentication enable list. The options are as follows: - Enable. The privileged EXEC password is used for authentication. - Line. The line password is used for authentication. - None. The user cannot be authenticated. - RADIUS. The user's name and password are authenticated using the RADIUS server instead of local server. - TACACS. The user's name and password are authenticated using the TACACS server. - Deny. Authentication always fails. 7. Click the Add button. The login list is added to the switch. Configure the Dot1x Authentication List You can configure a dot1x list. A dot1x list specifies the authentication methods to validate port access for the users associated with the list. Only one dot1x method can be supported. The default list is dot1xList. To configure the dot1x authentication list: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Management Security > Authentication List > Dot1x Authentication List. Manage Switch Security 516 User Manual