Netgear XSM4324FS User Manual - Page 262

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure MVR You can configure basic, advanced, group, interface or group membership settings. Configure Basic MVR Settings To configure basic MVR settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching > MVR > Basic > MVR Configuration. 5. Use MVR Running to Enable or Disable the MVR feature. The factory default is Disable. 6. Use MVR Multicast VLAN to specify the VLAN on which MVR multicast data is received. All source ports belong to this VLAN. The value can be set in a range of 1 to 4093. The default value is 1. 7. Use MVR Global Query Response Time to set the maximum time to wait for the IGMP reports membership on a receiver port. This time applies only to receiver-port leave processing. When an IGMP query is sent from a receiver port, the switch waits for the default or configured MVR query time for an IGMP group membership report before removing the port from the multicast group Configure Switching Information 262 User Manual