Netgear XSM4324FS User Manual - Page 483

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Select the administrative mode for DiffServ: • Enable. Differentiated Services are active. This the default mode. • Disable. The DiffServ configuration is retained and can be changed but it is not active. 6. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information that is displayed. Table 184. DiffServ Configuration Field Class Table Class Rule Table Policy Table Policy Instance Table Policy Attributes Table Service Table Description The current and maximum number of classifier entries in the table. DiffServ classifiers differentiate among traffic types. The current and maximum number of class rule entries in the table. Class rules specify the match criteria that belong to a class definition. The current and maximum number of policy entries in the table. The policy determines the traffic conditioning or service provisioning actions applied to a traffic class. The current and maximum number of policy-class instance entries in the table. A policy-class instance is a policy that is associated with an existing DiffServ class. The current and maximum number of policy attribute entries in the table. A policy attribute entry attaches various policy attributes to a policy-class instance. The current and maximum number of service entries in the table. A service entry associates a DiffServ policy with an interface and inbound or outbound direction. Configure the Global DiffServ Settings Packets are filtered and processed based on defined criteria. The filtering criteria are defined by a class. The processing is defined by a policy's attributes. Policy attributes can be defined on a per-class instance basis, and it is these attributes that are applied when a match occurs. The configuration process begins with defining one or more match criteria for a class. Then one or more classes are added to a policy. Policies are then added to interfaces. Packet processing begins by testing the match criteria for a packet. The all class type option specifies that each match criteria within a class must evaluate to true for a packet to match that class. The any class type option specifies that at least one match criteria must evaluate to true for a packet to match that class. Classes are tested in the order in which they were added to the policy. A policy is applied to a packet when a class match within that policy is found. Configure Quality of Service 483 User Manual