Netgear XSM4324FS User Manual - Page 338

M4300 Intelligent Edge Series Fully Managed Stackable Switches Add an Entry to the ARP Table You can add an entry to the Address Resolution Protocol (ARP) table. To add an entry to the ARP table: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> ARP > Advanced > ARP Create. 5. Use IP Address to enter the IP address to add. It must be the IP address of a device on a subnet attached to one of the switch's existing routing interfaces. 6. Use MAC Address to specify the unicast MAC address of the device. Enter the address as six 2-digit hexadecimal numbers separated by colons, for example, 00:06:29:32:81:40. 7. Click the Add button. The static ARP entry is added to the switch. 8. Click the Apply button. Your settings are saved. Manage Routing 338 User Manual