Netgear XSM4324FS User Manual - Page 36

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Define the following fields: • System Name. Enter the name to identify this switch. You can use up to 255 alphanumeric characters. The factory default is blank. • System Location. Enter the location of this switch. You can use up to 255 alphanumeric characters. The factory default is blank. • System Contact. Enter the contact person for this switch. You can use up to 255 alphanumeric characters. The factory default is blank. • Login Timeout. Specify how many minutes of inactivity can occur on a serial port connection before the switch closes the connection. Enter a number between 0 and 160 minutes. The factory default is 5. Entering 0 disables the time-out. • Management Source Interface. Select the management interface that is used as source interface for SNMP trap, syslog, DNS, TACACS+, RADIUS, sflow, and SNTP applications. Possible values are as follows: - None - Routing Interface - Routing VLAN - Routing Loopback Interface - Service Port - Different. For some applications from the list, the source interface is configured separately. They display in the list only if this is the case. By default VLAN 1 is used as the source interface. 6. Click the Apply button. Your settings are saved. The following table describes the status information in the Application Information and System Information sections on the page. Table 7. Application Information and System Information Field Application Information App Name App Status Version System Information Product Name IPv4 Management Address IPv6 Management Address Description The name of the application that functions as the Universal Plug and Play (UPnP) agent. The status of the application. The version of the application. The product name of this switch. The IPv4 address and mask assigned to the management VLAN interface. The IPv6 address and mask assigned to the management VLAN interface. Configure System Information 36 User Manual