Netgear XSM4324FS User Manual - Page 242

M4300 Intelligent Edge Series Fully Managed Stackable Switches 10. From the Fast Leave menu, select to enable or disable the IGMP snooping fast leave mode for the interface. This selection enables or disables the automatic assignment of fast-leave messages for the interface. The default is Disable. The Fast Leave Operational Mode field shows the status of the interface. 11. From the Proxy Querier menu, select to enable or disable the proxy querier for the interface. If disabled, the IGMP proxy query with source IP address 0.0.0.0 is not sent in response to an IGMP leave packet. The default is Enable. 12. Click the Apply button. Your settings are saved. Configure IGMP Snooping for VLANs Automatically with IGMP Plus Mode IGMP Plus mode lets you automatically configure IGMP snooping for VLANs, which is used to build forwarding lists for multicast traffic. You can also configure IGMP snooping for VLANs manually (see Configure IGMP Snooping Manually on page 238). To configure IGMP snooping for VLANs automatically: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching> Multicast > IGMP Snooping > IGMP VLAN Configuration. 5. Select the check box next to the VLAN ID. 6. From the IGMP Plus Mode menu, select to enable or disable the IGMP Plus mode on the VLAN. If enabled, the following IGMP snooping modes are automatically enabled for the VLAN: • Admin mode • Exclude Mrouter Interface Mode • Fast-Leave • Report Flood Mode Configure Switching Information 242 User Manual