Netgear XSM4324FS User Manual - Page 422

M4300 Intelligent Edge Series Fully Managed Stackable Switches 4. Select Routing > Multicast > Global Configuration. 5. In the Admin Mode field, select the Enable or Disable option to set the administrative status of multicast forwarding in the router. The default is Disable. 6. Click the Apply button. Your settings are saved. The following describes the nonconfigurable information that is displayed. Table 154. Multicast Global Configuration Field Protocol State Table Maximum Entry Count Protocol Table Entry Count Description The operational state of the multicast forwarding module. The maximum number of entries in the IP multicast routing table. The multicast routing protocol presently activated on the router, if any. The number of multicast route entries currently present in the multicast route table. Configure the Multicast Interface To configure the multicast interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing > Multicast > Interface Configuration. Configure Multicast Routing 422 User Manual