Netgear XSM4324FS User Manual - Page 636

M4300 Intelligent Edge Series Fully Managed Stackable Switches The following table describes the detailed port information displayed on the page. To view information about a different port, select the port number from the Interface menu. Table 222. Port Detailed Statistics Field MST ID ifIndex Port Type Port Channel ID Port Role STP Mode STP State Admin Mode Flow Control Mode LACP Mode Physical Mode Physical Status Description Display the MST instances associated with the interface. This object indicates the ifIndex of the interface table entry associated with this port on an adapter. For normal ports this field is normal. Otherwise the possible values are as follows: • Mirrored. This port is a participating in port mirroring as a mirrored port. Look at the Port Mirroring pages for more information. • Probe. This port is a participating in port mirroring as the probe port. Look at the Port Mirroring pages for more information. • Trunk Member. The port is a member of a link aggregation trunk. Look at the Port Channel pages for more information. If the port is a member of a port channel, the port channel's interface ID and name are shown. Otherwise, Disable is shown. Each MST bridge port that is enabled is assigned a port tole for each spanning tree. The port role is one of the following values: Root, Designated, Alternate, Backup, Master, or Disabled. The Spanning Tree Protocol administrative mode associated with the port or port channel. The possible values are as follows: • Enable. Spanning tree is enabled for this port. • Disable. Spanning tree is disabled for this port. The port's current Spanning Tree state. This state controls what action a port takes on receipt of a frame. If the bridge detects a malfunctioning port it places that port into the broken state. The states are defined in IEEE 802.1D: • Disabled • Blocking • Listening • Learning • Forwarding • Broken The port control administration state. The port must be enabled in order for it to be allowed into the network. The factory default is enabled. Indicates whether flow control is enabled or disabled for the port. This field is not valid for LAG interfaces. Indicates the Link Aggregation Control Protocol administrative state. The mode must be enabled in order for the port to participate in link aggregation. Indicates the port speed and duplex mode. In autonegotiation mode the duplex mode and speed are set from the autonegotiation process. Indicates the port speed and duplex mode. Monitor the Switch and Network 636 User Manual