Netgear XSM4324FS User Manual - Page 566

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure a Private VLAN Host Interface To configure a private VLAN host interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Traffic Control > Private VLAN > Private VLAN Host Interface Configuration. 5. In the Host Primary VLAN field, set the primary VLAN ID for Host Association mode. The range of the VLAN ID is 2-4093. 6. Use Host Secondary VLAN to set the secondary VLAN ID for Host Association mode. The range of the VLAN ID is 2-4093. 7. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information displayed on the page. Table 206. Private VLAN Host Interface Configuration Field Interface Operational VLAN(s) Description Select the physical or LAG interface. The operational VLANs. Manage Switch Security 566 User Manual