Netgear XSM4324FS User Manual - Page 225

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 78. CST Port Status (continued) Field Description Topology Change Acknowledge Identifies whether the topology change acknowledgement flag is set for the next BPDU to be transmitted for this port. It is either True or False. Edge port Indicates whether the port is enabled as an edge port. It takes the value Enabled or Disabled. Point-to-point MAC Derived value of the point-to-point status. CST Regional Root Bridge Identifier of the CST Regional Root. It is made up using the bridge priority and the base MAC address of the bridge. CST Path Cost Path Cost to the CST Regional Root. Port Up Time Since Counters Last Time since the counters were last cleared, displayed in Days, Hours, Cleared Minutes, and Seconds. Loop Inconsistent State This parameter identifies whether the port is in loop inconsistent state or not. Transitions Into Loop Inconsistent The number of times this interface transitioned into loop inconsistent state. State Transitions Out Of Loop Inconsistent State The number of times this interface transitioned out of loop inconsistent state. Configure MST Settings You can configure Multiple Spanning Tree (MST) on the switch. To configure an MST instance: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Switching > STP > Advanced > MST Configuration. Configure Switching Information 225 User Manual