Netgear XSM4324FS User Manual - Page 572

M4300 Intelligent Edge Series Fully Managed Stackable Switches 7. Use VLAN ID to enter the VLAN for which the DHCP snooping mode is to be enabled. 8. Use DHCP Snooping Mode to enable or disable the DHCP snooping feature for the entered VLAN. The factory default is Disable. 9. Click the Apply button. Your settings are saved. Configure a DHCP Snooping Interface To configure a DHCP snooping interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Control > DHCP Snooping > Interface Configuration. 5. Use one of the following methods to select an interface: • In the Go To Interface field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Interface column, select the check box for the port that you want to configure, select multiple check boxes to apply the same setting to all selected interfaces, or select the check box in the table heading to apply the same settings to all interfaces. 6. If Trust Mode is enabled, DHCP snooping application considers the port as trusted. The factory default is Disable. Manage Switch Security 572 User Manual