Netgear XSM4324FS User Manual - Page 682

M4300 Intelligent Edge Series Fully Managed Stackable Switches 6. The Image Name field is visible only when File Type Software is selected. Use Image Name to select one of the images from the list: • Image1. Specify the code image1 to download. • Image2. Specify the code image2 to download. 7. Next to Select File, click the Browse button and navigate to the file to download. You can select a file of up to 80 characters. 8. Click the Apply button. The download begins. The Download Status field displays the status during transfer file to the switch. Note: After a file transfer is started, wait until the page refreshes. When the page refreshes, the Select File option is blanked out. This indicates that the file transfer is done. Download a File from a USB Device To download a file from a USB device: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Maintenance > Upgrade> USB File Upgrade. 5. Use File Type to specify what type of file to download: • Software. Software code to download to the operational flash. • Text Configuration. Configuration s in text mode to update the switch's configuration (Startup-config). Maintenance and Troubleshooting 682 User Manual