Netgear XSM4324FS User Manual - Page 680

M4300 Intelligent Edge Series Fully Managed Stackable Switches 9. Use Transfer Mode to specify what protocol to use to transfer the file: • TFTP. Trivial File Transfer Protocol • SFTP. Secure File Transfer Protocol • SCP. Secure Copy Protocol • FTP. File Transfer Protocol 10. Use Server Address Type to specify either IPv4, IPv6, or DNS to indicate the format of the TFTP/SFTP/SCP Server Address field. The factory default is IPv4. 11. Use Server Address to enter the IP address of the TFTP server in accordance with the format indicated by the server address type, for example an IP address in the x.x.x.x format. The factory default is the IPv4 address 0.0.0.0. 12. Use Remote File Path to enter the path of the file to download. The file path cannot include the following symbols Up to 160 characters can be entered. The factory default is blank. 13. Use Remote File Name to enter the name of the file to download from the server. The file path cannot include the following symbols You can enter up to 32 characters. The factory default is blank. 14. Use User Name to enter the user name for remote login to SFTP/SCP server where the file resides. Note: This field is visible only when the SFTP or SCP transfer mode is selected. 15. Use Password to enter the password for remote login to SFTP/SCP server where the file resides. Note: This field is visible only when the\ SFTP or SCP transfer mode is selected. 16. Click the Apply button. The file is downloaded. The last row of the table displays information about the progress of the file transfer. It is displayed only after the process starts. The page refreshes automatically until the file transfer completes. Download a File to the Switch Using HTTP You can download files of various types to the switch using an HTTP session (for example, through your web browser). For you to able to download SSH key files, SSH must be administratively disabled and no active SSH sessions must occur. Maintenance and Troubleshooting 680 User Manual